Chopped Strand Carbon Fiber
Introduction
Carbon fiber is a new material, it has the obvious advantage of high tensile strength, abrasion resistance,
corrosion resistance, good conductivity, and high temperature resistance.
Features & Advantages
As chopped strand carbon fiber is chopped from carbon fiber filament, its essential performance depends on its
basic raw materials - carbon fiber filament. Compared with fiber filament, the short fiberdispersed more evenly,
and it's craft is more simple, so it can be applicated in the areas which the filament can not be used in.
Performance
Filament Diameter |
7.0-10μm |
Tensile Strength |
3.6-3.8GPa |
Modulus Of Resistance |
220-240GPa |
Carbon Content |
≥95% |
Elongation |
1.5% |
Density |
1.6-1.76 g/ cm3 |
External view |
Black |
Application
1). Chopped carbon fiber can be mainly applied in below areas. Reinforce the modified plastics
such as nylon (pa), polypropylene(PP), polycarbonate (PC), phenolic(PF),
polytertrafluoroethylene (PTFE), polyimide(PI), etc;
2)Construction: Reinforce the materials like cement, conductive coatings paint;
3)Electric field: Can be used to produce conductive paper, electric panels, conductive FRP, needle mat, etc.;
4)Insulation material: Carbon fiber reinforced refractory brick, carbon fiber-reinforced ceramics.
5)New energy: Fuel cell electrodes.
Advantages: Now it is used in many fields, For examples: Electronic chips, conducting plate, conducting floor, electronic machinery,
The chopped carbon fiber is made from chopping high strength carbon fibers into certain length. It can be used to
reinforcement in thermoplastics or thermoset resin. The length of chopped carbon fiber according to
the customized requirements, for more question, please contact us freely.